|
Nosepiece Removal
1. Turn over Pipet-Aid® XP.
2. Slide nosepiece release away from nosepiece while turning nosepiece counter-clockwise 1/4 turn. Remove.
3. Remove rubber insert.
4. Remove filter and TC gasket and discard filter only. Reuse TC gaskets.
|
Replacing Filter
1. Place one TC gasket on each end of new filter. Place new filter into handle. Orient such that long stem is directed away from handle.
2. Push rubber insert onto filter end.
3. Reconnect nosepiece housing by pressing and turning clockwise until locked.
|
